Telescopic Handler Forklifts
Diesel Forklift
Compare the supplied diesel forklift configurations and their documented technical data.
- K20 to HX50 and H100 models
- 2,000–10,000 kg rated capacity across models
- 3,000 mm listed lift height
Model data is supplied by the client. Configuration and operating conditions need confirmation for your order.
Overview
Compare the supplied diesel forklift configurations and their documented technical data.
The technical data below retains the supplied model groups and table entries. Compare each column before selecting a configuration.
Diesel
Pending confirmation. A model-specific operating video and full product narrative have not been supplied. No demonstration video is implied by this preview.
Documented configuration features
- Model-specific load centers of 500 or 600 mm
- Free-lift-height and mast-dimension data retained
- Engine, tyres and dimensions documented in the source
Working principle
Pending confirmation. A reviewed working-principle description and operating manual are required for this equipment type. This section is reserved for that source material.
Model specifications
| Model | Model | Model | Unit | K20 | K25 | K30 | K35 | K40 | H45 | HX50 | H100 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rated capacity | Rated capacity | Rated capacity | kg | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 | 5000 | 10000 |
| load Centre | load Centre | load Centre | mm | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 600 |
| Lift height | Lift height | Lift height | mm | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Free lift height | Free lift height | Free lift height | mm | 130 | 130 | 140 | 145 | 150 | 150 | 150 | 200 |
| Fork size | Fork size | L×W×T | mm | 1070×100×40 | 1070×122×40 | 1070×122×45 | 1070×122×50 | 1070×122×50 | 1070×150×50 | 1070×150×50 | 1800×175×80 |
| Mast tilt angle | Mast tilt angle | F/R | Deg. | 6°/12° | 6°/12° | 6°/12° | 6°/12° | 6°/12° | 6°/12° | 6°/12° | 6°/12° |
| Front overhang | Front overhang | Front overhang | mm | 441 | 441 | 460 | 465 | 485 | 560 | 560 | 700 |
| Rear overhang | Rear overhang | Rear overhang | mm | 520 | 520 | 550 | 550 | 590 | 580 | 580 | 748 |
| Min. ground clearance(Bottom of mast) | Min. ground clearance(Bottom of mast) | Min. ground clearance(Bottom of mast) | mm | 115 | 115 | 135 | 135 | 135 | 175 | 175 | 235 |
Overall dimensions | Overall dimensions | Length to face of fork (without fork) | mm | 2595 | 2595 | 2750 | 2750 | 2820 | 3240 | 3100 | 4298 |
| Overall width | mm | 1160 | 1160 | 1240 | 1240 | 1240 | 1480 | 1480 | 2250 | ||
| Mast lowered height | mm | 1980 | 1980 | 2070 | 2070 | 2070 | 2275 | 2275 | 2830 | ||
| Mast extended height (with backrest) | mm | 4050 | 4050 | 4065 | 4065 | 4065 | 4310 | 4310 | 4380 | ||
| Overhead guard height | mm | 2220 | 2220 | 2220 | 2220 | 2220 | 2350 | 2350 | 2540 | ||
| Turning radius(outside) | Turning radius(outside) | Turning radius(outside) | mm | 2480 | 2480 | 2600 | 2600 | 2650 | 3050 | 2990 | 3930 |
| Speed | Speed | Travel(Unladen) | km/h | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 28 |
| Lifting(Laden) | mm/sec | 540 | 540 | 430 | 400 | 400 | 420 | 380 | 220 | ||
| Lowering(Laden) | mm/sec | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 360 | ||
| Max. Drawbar pull(Laden/unladen) | Max. Drawbar pull(Laden/unladen) | Max. Drawbar pull(Laden/unladen) | KN | 17 (14.5) | 17 (14.5) | 18 (15.7) | 18 (18) | 18（18） | 24 (20) | 15 | 69 |
| Max. Gradeability(Laden) | Max. Gradeability(Laden) | Max. Gradeability(Laden) | % | 20 | 20 | 20 | 18 | 16 | 20 | 12 | 20 |
Tyre | Tyre | Front | mm | 7.00-12-12PR | 7.00-12-12PR | 28×9-15-12PR | 28×9-15-12PR | 28×9-15-12PR | 8.25-15-14PR | 300-15-18PR | 9.00-20 |
| Rear | mm | 6.00-9-10PR | 6.00-9-10PR | 6.50-10-10PR | 6.50-10-10PR | 6.50-10-10PR | 700-12-14PR | 700-12-14PR | 9.00-20 | ||
| Tread | Tread | Front | mm | 970 | 970 | 1000 | 1000 | 1000 | 1180 | 1190 | 1585 |
| Rear | mm | 980 | 980 | 980 | 980 | 980 | 1190 | 1110 | 1715 | ||
| Wheelbase | Wheelbase | Wheelbase | mm | 1650 | 1650 | 1750 | 1750 | 1750 | 2100 | 1950 | 2850 |
| Operating weight | Operating weight | Operating weight | kg | 3260 | 3510 | 4100 | 4390 | 4550 | 6490 | 6010 | 12710 |
| Weight Distribution | Laden | Front Axle | kg | 4890 | 5410 | 6300 | 7080 | 7520 | 9600 | ||
| Rear Axle | kg | 570 | 610 | 800 | 810 | 830 | 1390 | ||||
| Unladen | Front Axle | kg | 1510 | 1280 | 1536 | 1590 | 1600 | 2830 | 5890 | ||
| Rear Axle | kg | 1750 | 2230 | 2546 | 2810 | 2950 | 3600 | 6820 | |||
| Battery | Voltage/Capacity | Voltage/Capacity | v/Ah | 12/80 | 12/80 | 12/80 | 12/80 | 12/80 | 24/80 | 12/80 | 24/80 |
| Engine | model | model | QC490BPG | QC490BPG | QC490BPG | QC490BPG | QC490BPG | 4D35G | A498 | CA6110 | |
| Manufacture | Manufacture | (xinchai) | (xinchai) | (xinchai) | (xinchai) | (xinchai) | (xinchai) | (xinchai) | (Xichai) | ||
| Rated output/r.p.m. | Rated output/r.p.m. | kW | 39/2650 | 39/2650 | 39/2650 | 39/2650 | 40/2650 | 48/2300 | 45/2500 | 83/2000 | |
| Rated torque/r.p.m. | Rated torque/r.p.m. | N-m | 160/1980 | 160/1980 | 160/1980 | 160/1980 | 160/1800-2000 | 230/1600 | 193/1800 | 450/1400-1500 | |
| No.of Cylinder | No.of Cylinder | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 6 | ||
| Bore×Stroke | Bore×Stroke | mm | 90×100 | 90×100 | 90×100 | 90×100 | 90×100 | 98×105 | 98×105 | 110×125 | |
| Displacement | Displacement | cc | 2540 | 2540 | 2540 | 2540 | 2600 | 2540 | 3168 | 7127 | |
| Fuel Tank Capacity | Fuel Tank Capacity | L | 60 | 60 | 60 | 60 | 60 | 90 | 90 | 170±10 | |
| Transmission | Manufacture | Manufacture | CHINA | CHINA | CHINA | CHINA | CHINA | CHINA | CHINA | Zhe Jiang zhongchai | |
| Type | Type | Mechanical manual transmission | Mechanical manual transmission | Mechanical manual transmission | Mechanical manual transmission | Mechanical manual transmission | Mechanical manual transmission | Hydraulic Auto | Hydraulic Auto | ||
| Stage | F/R | 1/1 (2/2) | 1/1（2/2） | 1/1（2/2） | 1/1（2/2） | 1/1（2/2） | 1/1（2/2） | 1/1（2/2） | 2 / 2 | ||
| Operating pressure(For attachments) | Operating pressure(For attachments) | Operating pressure(For attachments) | Mpa | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 19 | 20 |
Source table entries are preserved, including model options and units. Ambiguous source labels or units require technical review; listed maxima must not be combined as simultaneous operating performance.
Structure & installation
The diesel matrix contains the mast, chassis, engine and dimensional entries for each model. A rated capacity entry is not a load chart; operating limits require the selected model’s documentation.
Application discussion
The company profile identifies construction, infrastructure and urban development as applications for its construction machinery and concrete equipment.
Review application requirementsSelection & operating limits
Pending confirmation. Confirm site dimensions, ground conditions, local requirements and the selected model’s technical documentation before use. No load chart, operating procedure or project engineering design is supplied by this page.
Manufacturing & product evidence
EPDAS identifies specialized manufacturing bases for the relevant equipment families.
Pending confirmation. Model-specific inspection and certification evidence remains to be confirmed.
Purchasing & support
The company profile lists global sales and after-sales service as part of the Group’s activities. Discuss documentation, training, spare parts and technical support for the selected equipment.
Pending confirmation. Warranty, response times, delivery schedule, installation scope and commercial terms are confirmed for the individual order.
Selection questions
Which models are included?
The complete supplied model groups and technical rows appear in the specifications section above.
Does the photo identify the exact configuration?
The images illustrate the equipment type. Match the selected model and order configuration with the sales team.
What should I send with an inquiry?
Share your application, location, capacity or load requirements and site constraints. Model-specific limits and support terms require confirmation.
Discuss this equipment configuration.
Share your application, capacity, location and equipment requirements.
Request a quote